Injection Molding Injection Molding Products Distribution Support About Us Testimonials Contact

Self Aligning Tip

Permits perfect radius alignment between the sprue bushing and the nozzle tip
Prevents wear on the sled of the molding machine caused by horizontal or vertical side pressures
Compensates for misalignment up to .047" in all directions
Extends the life of the ways in new molding machines
Assemblies are made from hardened and polished 4140 PH & Nitrated steel (Alternate materials upon request)
May be installed on small tonnage machines
Uses standard nozzle heater bands
JDL Enterprises, Inc - SELF ALIGNING TIP JDL Enterprises, Inc - SELF ALIGNING TIP
JDL Enterprises, Inc - SELF ALIGNING TIP
JDL Enterprises, Inc - SELF ALIGNING TIP
Click on any image for more information

The Self Aligning Tip easily screws into the end of any injection nozzle. When wear occurs, only the spherical tip detail is replaced. This saves you money while ensuring the integrity of the intended alignment.

You can also replace or change radii by purchasing the spherical tip detail alone. An assembly can be ordered and designed to your specific requirements.

Assembly order example: SAT-GP-R.5 = Assembly with General Purpose Tip with radius of .5"

Developed, Engineered and Manufactured by JDL Enterprises, Inc.


Injection Molding | Injection Molding Products | About Us | Contact

Copyright © 2006-2015 JDL Enterprise, All rights reserved | Injection Molding Company

JDL Enterprise
36425 Maas Drive Sterling Heights, MI 48312
Phone: 586-977-8863
Fax:586-977-9166