Home About Us Products Worldwide Distribution Testimonials Technical Support Contact Us

 

       SELF ACTUATING NOZZLE

The Self Actuating Nozzle has a unique stainless steel spring arrangement.

This nozzle works with gas assist pressures up to 8,500 PSI. It may be used with Gas Assist, Conventional Molding or Structural Foam applications.
Requires 400 lbs. pressure to open
Requires no hydraulics or pneumatics
Contains no seals to wear
Screws into standard barrel thread – 1 3/4” – 8
May be used with stiff and glass filled materials
May be installed on small tonnage machines
Uses standard nozzle heater bands

 

    Special sizes, tip openings, threads and angles may be     customized to fit your Injection molding needs.

 

JDL Enterprise, Inc - SELF ACTUATING NOZZLE JDL Enterprise, Inc - SELF ACTUATING NOZZLE
JDL Enterprise, Inc - SELF ACTUATING NOZZLE
Click on image for detail parts

Nozzle Function:

The resin injection pressure opens the valve and the resin flows freely through the nozzle without shearing. When the injection pressure is removed, the valve closes and seats.

However, with gas assist, gas pressure is applied and further seats the valve, forcing the resin into the mold, preventing gas from entering the injection barrel.
      36425 Maas Drive, Sterling Heights, MI 48312
      Phone 586-977-8863 Fax 586-977-9166
:: Home   :: About Us   :: Products   :: Contact Us   :: Sitemap
Copyright © 2006 jdlent, All rights reserved.                Designed by Digital Marketing Solution LLC